|
|
Threading Tools
| Catalogue-No.: |
353000F |
| Type of tool: |
Hand tap No.2 (F) |
| DIN-Standard: |
DIN 5157 |
| Work materials: |
easy to cut steels up to 800 N/mm² |
| Classification of work materials: |
1.1-1.3; 3.3; 3.4; 4.2; 4.3 |
| DIN Chamfer length: |
C/2-3P |
| Execution: |
No.2 |
| Substrate: |
HSS |
| Thread types: |
G |
|
|
Recommended for hole types:
 | Detailed data
| Gew. d1 | P* | l1 | l2 | d2 | l | a | z | Art.-Nr. | Drill hole-Ø | | G 1/8 | 28,00 | 63 | 20 | 7,00 | 8,00 | 5,50 | 0 | 101041 | 8,80 | | G 1/4 | 19,00 | 70 | 22 | 11,00 | 12,00 | 9,00 | 0 | 101042 | 11,80 | | G 3/8 | 19,00 | 70 | 22 | 12,00 | 12,00 | 9,00 | 0 | 101043 | 15,25 | | G 1/2 | 14,00 | 80 | 22 | 16,00 | 15,00 | 12,00 | 0 | 101044 | 19,00 | | G 5/8 | 14,00 | 80 | 22 | 18,00 | 17,00 | 14,50 | 0 | 101045 | 21,00 | | G 3/4 | 14,00 | 90 | 22 | 20,00 | 19,00 | 16,00 | 4 | 101046 | 24,50 | | G 7/8 | 14,00 | 90 | 22 | 22,00 | 21,00 | 18,00 | 0 | 101047 | 28,25 | | G 1 | 11,00 | 100 | 25 | 25,00 | 23,00 | 20,00 | 0 | 101048 | 30,75 | | G 1 1/4 | 11,00 | 125 | 40 | 32,00 | 27,00 | 24,00 | 0 | 101050 | 39,25 | | G 1 1/2 | 11,00 | 140 | 40 | 36,00 | 32,00 | 29,00 | 0 | 101052 | 45,25 | | G 2 | 11,00 | 160 | 40 | 45,00 | 38,00 | 35,00 | 0 | 101054 | 57,00 |
| back to the list | new search | | 
P* = Thread/Inch |
|
|
