News

		05.02.2013 SYNCHRO-Taps 2013A Universal, process-sure & fast The new SYNCHRO-Program from WEXO! Valid from February 1st 2013

		07.11.2012 The new RatioDrill - Catalogue 2013A Now also with NC-Spotting drills!

		07.11.2012 RatioTap-Catalogue 2013A The new RatioTap-Catalogue 2013A is ready!

		14.09.2012 New HPC-Multiple Flute end mills Solid carbide end mill HPC     z = 6 / 8

		14.03.2012 New Deburring cutter E90TA-HM at the RatioMill-Catalogue 2012 For chamfering and deburring work pieces. Useable in a very wide range of work materials!

		13.03.2012 The new RatioMill - catalogue 2012A Now also with 90° Deburrer, as well as Slot drill with 3 cutting edges

		29.09.2011 The new WEXO Catalogue 2011/2012 Our new catalogue is ready and will be valid from November 1st, 2011!

		02.08.2011 Deep hole drilling in new dimensions The new solid carbide deep hole drills from WEXO are now reaching 50xd!

		01.08.2011 Innovation in Micro-Machining The new solid carbide Microdrill from WEXO

		07.09.2010 New HPC-Carbide end mill for the RatioMill - Program WEXO again enlarged the RatioMill - Program and includes a new HPC-Carbide end mill with unequal indexing.

		24.08.2010 New High-Feed end mill for the RatioMill - Program High-Feed carbide end mill with TiAlN+ coating. WEXO has enlarged the program of RatioMill products.

		28.06.2010 High-Performance powder metal steel taps for universal application - Program 2010/1 The new program 2010/1 Includes now tolerance "6GX" and short chamfer "Form E"!

		01.01.2010 RatioLine - THE ALTERNATIVE Our new marketing strategy RatioLine has enabled us to unify our customers’ key purchasing criteria.

		04.05.2009 RatioDrill - Catalogue 2009/2010 NEW: 8xd and 12xd is now also available!

		16.09.2008 SYNCHRO-Taps and new Synchro-Tapping-Holder Universal, process-sure & fast The new SYNCHRO-Program from WEXO! Valid from October 1st, 2008

		15.09.2008 High-Performance powder metal steel taps for universal application The new program 2008/2009 - includes also Whitworth-Pipe-Thread (G) Valid from October 1st, 2008

		01.05.2004 High-Performance with the new "PM-Endmills" from WEXO WEXO "Powder Metal Steel" End Mills for High-Performance Milling of alloyed steels as well as Ni-based and Ti-based materials.

		01.02.2004 Increase productivity by drilling stainless steels with the "UNIVERSAL-DRILL" from WEXO

		10.11.2003 Hard-Drilling and Hard-Tapping up to 70 HRC To reduce cycle times in mould and die industry with conventional machining methods is very difficult, even nearly impossible.

		10.11.2003 Process stable HSC-Hard-Milling over 10xd and smaller dia. 1,0mm Miniature Carbide End Mills with extra long neck part.